Prevent costly problems with a proper coating inspection

There is a high need of coating inspection in the United Arab Emirates due to the fast industrial and architectural expanding of Dubai, Abu Dhabi and other cities: we need trained and certified professionals on board at every step, testing and guiding the coating process, as well as making sure the coating job is maintained. Do it once, do it right; the cost of repairing a badly executed coating can be many times the cost to paint it in the first place. Problems can arise during the pre-treatment, application, and curing phases of a coating job in the United Emirates. Coating jobs that at first seem perfect can begin to fail. There are so many variables in any coating application, from the environment to the material itself, that getting an effective long-lasting job is a highly skilled task. In this article we will guide you through the world of international coating inspection templates and certification.

Standard coating inspection checklist

The application process must be monitored from beginning to end; from surface preparation to final colour and gloss. This process generally consists of six standard steps:

  1. Inspecting the surface preparation and pre-treatment
    The most fundamental phase of a coating inspection. A well-prepared surface is the foundation of a successful coating. The aspects to inspect include surface cleanness and roughness. There are coating inspectors who specialize in assessing surface preparation such as sand blasting.
  2. Arab man doing destructive adhesion check on a sample substrate

    Checking for sufficient adhesion is part of the coating inspection process

    Assessing climate conditions
    Environmental factors such as climate must be assessed to prevent the air, surface temperature, or humidity affecting the curing and adhesion of the coating. The specification should define the optimal application conditions.

  3. Measuring film thickness (before and after curing)
    It is important to inspect the film thickness of powder coatings and liquid coatings before the coating cures so that and deviation from the specification can be detected and repaired before curing. The dry film thickness is measured to make absolutely sure the film thickness is in accordance the optimal performance of the coating.
  4. Observing the curing rate
    The coating must be cured to the degree defined in the specification; if the coating is not cured enough the surface lacks hardness, making the finished coating layer more vulnerable to hazards such as abrasion and chemicals.
  5. Checking for sufficient adhesion
    The current methods of testing adhesion are all destructive, so the test is usually conducted on a sample substrate. It is crucial that the sample has undergone the exact same treatments under the exact same conditions as the real substrate.
  6. Evaluating the colour and gloss of the cured film
    The colour of a coating needs to match the specification, but also be consistent across the whole surface. Gloss level is also measured, and checked for deviation.

Important steps before the actual coating inspection can begin

A coating inspection is carried out by a certified coating inspector who is familiar with all the aspects that contribute to optimal performance of a coating, and the specific standards each coating should individually meet. The coating inspection process starts with inspecting the substrate and the environment, which becomes part of a coating specification. A coating specification is an important document: it should provide clear and precise instructions to the contractor on what is to be done and how it is to be done in order to ensure optimal performance.

The coating survey

First of all you have a facility, infrastructure, asset or machinery that requires coating, or a coating job that needs refurbishing or evaluating. You want assurance that the job will, at every step, be of only the highest quality. Therefore, your coating inspection procedure starts with a site condition survey, which forms a foundation for the coating specification. This condition survey will answer questions such as:

  • What is the substrate, and its condition (damage, deterioration, rust, peeling)?
  • To what degree is there damage, what measures must be taken to repair it?
  • Are there any environmental issues which need to be taken into account?

Any problems that might be found, or maintenance required, need to be dealt with.

Writing the specification template

Is your coating specification clear and comprehensive, making sure there are no misunderstandings between engineers, applicators, contractors, and managers? The specification needs to clearly describe the owner’s expectations for their project, aesthetically and structurally. It must also include a description of the substrate and the environment the coating will be applied in. A well-written specification contains as much detail as is required to make these expectations clear, in plain unambiguous terms. It is a template, and thus needs to be as accurate as possible for the finished product to turn out as planned. Some manufacturers actually provide specification services, so that every step of the process is overseen by someone who knows the coating products inside out.

Maintenance inspection after coating application

Even though the coating is in place, the need for coating inspections has not disappeared. Maintenance inspections are conducted to confirm that the coating continues to meet the expectations set in the specification. An examination of all coatings needs to be carried out, to check that properties such as thickness, corrosion, and fire damage all conform to the specification. In offshore and other difficult-to-access environments, the coating inspectors use drones to carry out the inspection. Corrosion costs Arab companies billions of pounds a year, even when there is an anti corrosion system in place! Mainly for replacing and repairing damaged assets. Having a regular coating inspection can catch the problem before it goes too far.

When there is something wrong with the applied coating

Unfortunately it happens; coating projects fail, damage happens, or corrosion wins. But fear not!  In this case, the coating inspection has one goal – to find the culprit. Like a detective, they will gather and analyse information about the coating, its environment, its usage, its application process and thus uncover the reason behind the failure. Once found, they outline the best way forward to deal with the issue and how to prevent it recurring in the future.

Coating inspection courses and certifications in the United Arab Emirates

There are several coating inspector programmes (CIP) that set the standards for inspection as well as training and certifying inspectors. The most well known and recognised authority is NACE, the Worldwide Corrosion Authority. The NACE certifications and training are given and accepted in the UAE. Here you will find information on NACE and other relevant coating inspection programmes for the UK market. Note: ASTM and ISO (International Organisation for Standardization) are the international bodies which produce the standards that guide the coating industry.

NACE Certification

The NACE Coating Inspector Program (CIP) has been setting the standard for inspections in the protective coatings industry for over 30 years. The CIP is an international certification programme that produces the highest calibre of paint inspectors. These come in Level 1, 2, and 3, with 3 being the highest. NACE also publishes a book outlining the use of coating inspection equipment.

NACE Level 1 – This certification is designed for Coating Inspectors responsible for performing and documenting basic and non-destructive inspections of liquid coatings applied by brush, roller or spray to steel surfaces.
NACE Level 2 – This certification is designed for Level 2 Coating Inspectors responsible for performing and documenting non-destructive inspections of liquid and non-liquid coatings to any substrate in a shop setting or under the supervision of a level 3 inspector when working in a field setting.
NICE Level 3 Peer Review – This certification is designed for level 3 coating inspectors (which requires completion of certain requirements, an exam, and approved application) who aim to be recognized as leaders in the Coatings Inspection field.

SSPC PCI Certification

SSPC is the Society for Protective Coatings, and they run training and certification programs and bridging courses for coating inspectors. The PCI is the Protective Coatings Inspector program, and like the NACE certification there are 3 levels, which level 3 being the highest qualification.

ICorr Certification

ICorr, the Institute of Corrosion, is the British corrosion authority which provides a number of courses that enable paint inspectors to acquire the necessary qualifications to carry out inspections in the field. The courses are in Levels 1, 2, and 3, and are internationally accredited and recognised. The highest level is level 3, and only they are trained and certified to write paint specifications for coatings projects. The ICorr levels correspond to the NACE levels.

Find a coating inspector in the United Arab Emirates

It can be difficult to find an experienced and trustworthy coating inspector online. We have a network of internationally NACE certified inspectors, flike Paint-Inspector, and we are happy to connect you without any obligation. Contact us by clicking the quote button.